Converting Scenes into Standard Definition
1 Power the camcorder using the compact power adapter.
2Make sure there is a memory card in the camcorder with sufficient available space.
3Open the [Original], [Playlist] or [Video Snapshot] → [Original]/ [Playlist] index screen.
•Check that you have selected the f tab
•[Original] or [Video Snapshot] → [Original] index screen: To convert all the scenes recorded on a specific date, narrow down the scenes shown to scenes recorded on that date (051).
4Touch [a] to open the scene selection screen.
When you convert scenes from the [Playlist] index screen (including the playlist of video snapshot scenes), you cannot select individual scenes; instead, the entire playlist will be converted. Skip directly to step 6.
5Touch on the individual scenes you want to convert.
•A checkmark O will appear on scenes selected. Touch a selected scene again to remove the checkmark.
•To select all the scenes at once: Touch [Select All] instead of touching individual scenes. (Remove in advance any checkmarks from scenes you may have selected individually.)
6 Press Zand touch [Yes].
• If a copyright notice appears, read it carefully and touch [OK] if you agree.
• Before touching [Yes], you can touch [5] to change the conversion settings as described below.
• Touch [B] to interrupt the operation while it is in progress.
