Memory card is full
-The memory card is full. Delete some recordings (052, 98) to free some space or replace the memory card.
Memory card is
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi- tion of the LOCK switch.
Need to recover files from the memory card. Change the position of the LOCK switch on the memory card.
- This message will appear the next time you turn on the camcorder if power supply was acci- dentally interrupted while the camcorder was writing on the memory card and later the posi- tion of the card's LOCK switch was changed to prevent erasure. Change the position of the LOCK switch.
No faces were detected in this scene
- The camcorder did not detect any faces in the scene displayed. Be sure to turn on face detec- tion (062) when shooting movies.
No memory card
- Insert a compatible memory card into the camcorder (034).
No photos
- There are no photos to play back. Have fun taking some photos (038, 54).
No scenes
-There are no scenes in the memory selected. Have fun shooting some video (038).
-After selecting [Scenes with Faces] when narrowing down the scenes shown in the index screen: No scenes contain people’s faces or no scenes were recorded using the face detec- tion function.
Not enough available space
-Delete some recordings on the memory card (052, 98) or select the [3Mbps] bit rate for the conversion to SD.
Number of scenes already at maximum
-The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes (052) to free some space.
-The playlist can contain a maximum of 999 scenes.
Playlist is full. Cannot divide the scene.
-Scenes cannot be divided when the playlist already contains 999 scenes. Delete some scenes from the playlist (091).
Recording program: Underwater / Surface
Turn on the camcorder while holding PHOTO pressed down to change the recording program rXs.
-Follow the instructions to switch the recording program between [Underwater] and [Surface] while the camcorder is secured inside the optional