Sending Methods, Memory Sending | Canon PC1270D specification

SB_PC1270D_FG_EN.book Page 5 Monday, February 18, 2002 12:20 PM

Sending Methods

■Memory Sending

The machine begins calling the other party and transmitting the information after all documents are scanned into the memory. Since the machine is multitasking, you can perform other operations while the machine is sending a fax.

The machine has enough memory to store up to approximately 79 pages* (fewer if the document contains many graphics or particularly dense text).

* Based on Canon FAX Standard Chart No. 1, standard mode.

• When a large amount of memory is used, MEMORY FULL may be displayed depending on the documents to be sent, and the machine can neither store the scanned documents in memory nor send them. In this case, print or delete any documents in memory, or select a lower fax resolution such as STANDARD, then send the documents.

■Using the ADF

1Press FAX to set to Fax Mode.

2Prepare the document and load it face down in the ADF. (→ Reference Guide)

•To adjust the resolution, → p. 4-1.

•To adjust the contrast, → p. 9-4.

3Dial the other party’s fax number.

•For dialling methods, → p. 4-2.

•If you enter the wrong number, press Stop/Reset, then enter the correct number.

•If you must first dial a digit to get an outside line (“9”, for example), add a pause after that digit by pressing Redial/Pause.

4Press Start to begin scanning for sending.

•The machine begins calling the other party after all documents are scanned into the memory.

•When you use speed dialling, scanning starts automatically without pressing Start when the TIME OUT setting is on. (→ p. 9-6)

• To cancel sending once dialling has started, press Stop/Reset then press ▲ (–). (→ p. 4-7)

•You can scan a document up to 356 mm long.

•You can load up to 30 pages in the ADF.

•You can make up to 21 reservations.

	FAX 03/12 2001 15:30			4
Ex:	FaxTel	STANDARD		4

			Faxes
	MEM IN USE	0%	Faxes
	MEM IN USE
Ex:
			Sending
	(Currently used memory)		Sending
	(Currently used memory)

	DOCUMENT READY

	(Standby to scan)

	TEL=	9057951111
Ex:
Ex:

4-5

Image 37

Canon PC1270D manual Sending Methods, Memory Sending, Dial the other party’s fax number

Contents

Canon Copyright Using Your DocumentationTrademarks Contents Troubleshooting Special FeaturesSetting the Additional Functions Appendix Specifications Type Conventions Used in This Guide SBPC1270DFGEN.book Page vi Monday, February 18, 2002 1220 PM Customer Support IntroductionOperation Panel Fax Monitor Key Standby Display FAX 03/12 2001 FaxTel Standard SBPC1270DFGEN.book Page 4 Monday, February 18, 2002 1220 PM Registering Information Guidelines for Entering Numbers, Letters, and SymbolsMethods of Registering Information in the Machine Continue entering other numbers using the numeric keys Continue entering other letters using the numeric keysCorrecting a Mistake To Delete the Last Letter/Number Registering Sender Information What is Sender Information? Press OK Press Stop/Reset to return to standby display Use -or + to select 5.TIMER Settings Press OK twiceEntering the Date and Time Registering Your Fax/Telephone Number and Name Press OK Additional Functions 7.PRINT Lists Print Lists 1.USER Data Use -or + to select 7.PRINT Lists Press OK twice Dialling Through a Switchboard Setting the Telephone Line TypeUse -or + to select 3.FAX Settings If you selected Hooking or Earth Connection in step + to select the access type of your switching systemIf you selected Prefix in step Speed Dialling What is Speed Dialling?Speed Dialling Methods One-Touch Speed Dialling If you are unsure how to enter characters, → pRegistering Numbers for One-Touch Speed Dialling Register max digits, including spaces and pauses To Change a One-Touch Speed Dialling Entry Changing/Deleting a One-Touch Speed Dialling Entry Registering Numbers for Coded Speed Dialling Coded Speed DiallingTo Delete a One-Touch Speed Dialling Entry Digit code with the numeric keys Changing/Deleting a Coded Speed Dialling Entry To Delete a Coded Speed Dialling Entry To Change a Coded Speed Dialling Entry Creating Groups Group DiallingUse -or + to select 3.GROUP Dial To register a group under a one-touch speed dialling key To enter a destination registered for coded speed dialling Speed Dialling Lists Machine prints the list and returns to standby modePrinting Speed Dialling Lists + to select the list you want to print Samples of the lists are shown below Touch List Printing is cancelled Cancelling the Print Out List Use Registering a Password and Subaddress Press OK twice Enter a subaddress Enter a password SBPC1270DFGEN.book Page 14 Monday, February 18, 2002 1220 PM Setting the Scanning Resolution Adjusting the Quality of Your FaxesSending Faxes Preparing to Send a Fax When the Fax Number is Registered in the Machine When the Fax Number is Not Registered in the MachineDialling Methods Regular Dialling Coded Speed Dialling One-Touch Speed Dialling Directory Dialling Group DiallingPress Directory Press + to display the other names Memory Sending Sending MethodsDial the other party’s fax number Press Start to begin scanning for sending Press Press Function Press Book SendingPress OK Dial the other party’s fax number + to select the document size Cancelling Memory Sending Cancelling SendingPress Stop/Reset Press Function Press Fax Monitor Cancelling Manual Redialling Redialling When the Line is BusyCancelling Automatic Redialling Manual Redialling Sending a Document to More Than One Destination Sequential BroadcastingOne-touch speed dialling Coded speed dialling Press Start Press Function Press Delayed Transmission Delayed SendingPress Start to begin scanning Confirming Transmission Status Confirming Transmission Status and Sending ReservationConfirming Sending Reservation Printing a List of Documents in Memory Documents Stored in MemoryPress Function Press Memory Reference Use -or + to select 4.RESEND Document Resending a Document in MemoryMachine begins sending Printing a Document in Memory You can enter the transaction number using the numeric keysDocument Machine prints the document Press -to delete the document Deleting a Document from MemoryMachine deletes the document Different Ways to Receive a Fax Receiving Faxes Press Receive Mode until the mode you want appears Setting the Receive ModeSetting of the receive mode can be changed if necessary Current date and the selected receive mode are displayed What Happens When FaxTel Mode is Selected Setting the Options for FaxTel Mode FAX/TEL OPT. SET 2.F/T Ring Time Make sure Manual is displayed in the LCD Receiving Faxes ManuallyIf you hear a person’s voice If you hear a slow beep tone or silence Registering a Password and Subaddress for Polling Press OK twice Enter a password Cancelling Polling Receiving Cancelling Receiving Receiving Faxes in Memory When a Problem OccursPress -to cancel receiving Receiving While Performing Other Tasks Use the numeric keys to dial the international access code Special FeaturesSpecial Dialling Dialling an Overseas Number With Pauses Tone dialling is cancelled when you disconnect the call Switching Temporarily to Tone Dialling For details on dialling through a switchboard, → p Dialling Through a SwitchboardConfirming a Dial Tone Continue with the operation you are performing Restricting Use of Your Machine Cancelling Restriction of Your MachineEnabling Restriction of Your Machine Use -or Press OK Summary of Reports and Lists Reports and Lists Press Report Use -or + to select 1.ACTIVITY Report Press OK Press Function Slerexe Company Limited TX Transmission Report Multi TX/RX Transaction Report RX Reception Report LCD Messages Troubleshooting Sending Problems Faxing ProblemsYou cannot send a fax Faxes sent from the machine are spotted or dirty Cannot send using Error Correction Mode ECM Receiving ProblemsErrors occur frequently while sending Cannot receive a fax automatically Errors occur frequently while receiving Cannot receive using Error Correction Mode ECMCannot receive a document manually Print quality is poor If a Power Cut Occurs Telephone ProblemsYou cannot dial Telephone disconnects while you are talking If You Cannot Solve the Problem Accessing the Additional Functions Setting the Additional FunctionsUnderstanding the Additional Functions Menu Descriptions Common Settings Copy Settings FAX Settings Name Or no answer To 99 SEC Ignores the warning and keeps printing until the document is ADD. Registration Timer Settings Facsimile SpecificationsTelephone SBPC1270DFGEN.book Page 2 Monday, February 18, 2002 1220 PM Index CancellingAdditional Functions Confirming Dialling List See individual list names List setting3-7, 3-8 3-2, 3-3 Problems Name settingManual Memory Setting Timer See Delayed sendingReceiving See also individual receive modes Registering Telephone Line See Telephone line Timer sending See Delayed sending Memo