Canon PC1270D manual Or no answer

SB_PC1270D_FG_EN.book Page 6 Monday, February 18, 2002 12:20 PM

	Name	Descriptions
	2.PAUSE TIME	Sets the length of the pause you insert into a dialling sequence.
		1 to 15 SEC
	3.AUTO REDIAL	Sets whether to perform automatic redial when the other line is busy
		or no answer.
	ON	Customises the redial operation.
	1.REDIAL TIMES	Sets the number of retries.
		1 to 10 TIMES
	2.REDIAL INTERVAL	Sets period of time between rediallings.
		2 to 99 MIN.
	3.TX ERROR RESEND	Redialling is attempted when a transmission error occurred.
	ON	RESEND TX FROM: Sets the number of pages to be sent when
		redialling is attempted.
		ERROR & 1ST PAGE, ERROR PAGE, ALL PAGES
	OFF	Redialling is not attempted when a transmission error has occurred.
	OFF	After the first attempt at dialling fails, redialling is not attempted.
	4.ERASE FAILED TX	Sets the ERASE FAILED TX function.
	ON	The document is deleted from the memory stored in the machine if a
		transmission error has occurred.
	OFF	The document is not deleted from the memory stored in the machine
		even if a transmission error has occurred.
	5.TIME OUT	Enables/disables automatic scanning of documents after the fax
		number is entered by using speed dialling.
	ON	Scanning begins automatically in 5 or 10 seconds after you enter the
		phone number.
	OFF	Press Start to scan document. Otherwise, the machine will return to
		standby mode after 2 minutes.
RX SETTINGS		Sets the reception functions.
	1.ECM RX	ECM (error correction mode) receiving is turned on or off.
	ON	All receptions are conducted with ECM if the other party’s fax
		supports ECM.
	OFF	ECM is turned off.
	2.FAX/TEL OPT.SET	When FaxTel has been set, the optional settings are available.
	1.RING START TIME	Sets the duration that the machine listens for a fax tone before
		starting to ring.
		0 to 30 SEC
	2.F/T RING TIME	Sets the length of time the machine rings to alert you of an incoming
		call.
		10 to 60 SEC

9-6