Canon PC1270D manual

SB_PC1270D_FG_EN.book Page 5 Monday, February 18, 2002 12:20 PM

Receiving Faxes Manually

In Manual mode, if you connect a telephone to your machine, you can receive voice calls as well as manually activate reception of faxes. You can activate reception from the machine or from the telephone connected to the machine (this is called Remote receiving).

• For this mode, you need to connect a telephone to your machine. (→ Quick Start Guide)

•Make sure there are no documents in the ADF.

•Make sure the REMOTE RX setting is enabled. (→ p. 9-7)

•If your telephone line uses rotary pulse and the telephone connected to the machine cannot be switched to tone dialling, you cannot activate Remote receiving.

1 Make sure Manual is displayed in the LCD.

• To set Manual, → p. 5-2.

Ex:

2Make sure you have connected a telephone to the machine.

3When you hear the telephone ring, pick up the handset.

4❚ If you hear a person’s voice:

Start your conversation. If the caller wants to send a fax after talking to you, ask them to press Start on their fax machine.

When you hear a slow beep, press Start on the machine to begin receiving the fax. Hang up the handset.

FAX 03/12 2001 15:30

Manual STANDARD

5

Faxes

❚If you hear a slow beep tone or silence:

Someone is trying to send you a fax.

If the telephone is close to your machine, press Start on the machine to begin receiving the fax. Hang up the handset.

Receiving

•When no paper is loaded in the cassette, the LCD displays SUPPLY REC. PAPER. When paper is loaded, the machine automatically resumes printing.

•If the telephone is located away from your machine, dial 25 (the remote receiving ID) on your telephone and hang up. When your telephone line uses rotary pulse, switch to tone dialling on your telephone before dialling 25 (the remote receiving ID).

•You can change the number for the remote receiving ID, with a combination of two characters using 0 to 9, and , or disable remote receiving. (→ p. 9-7)

•If you have an answering machine connected to your machine that can carry out remote-control operations (controlling your answering machine from a remote telephone), the security code for this function may be the same as the remote

receiving ID. If so, make sure you change the machine’s remote receiving ID to make it distinct from the answering machine’s security code. (→ p. 9-7)

•The machine will beep and HANG UP PHONE will be displayed if the handset is

not hung up properly. Make sure the handset is seated properly in its cradle. If you do not want the machine to beep, disable the OFFHOOK ALARM setting. (→ p. 9-5)

5-5