Canon S600 Appendix, Installing the Printer Driver, To install the printer driver in Windows

Appendix

Installing the Printer Driver

If you are re-installing the printer driver, first follow the uninstall procedures on page 35 to remove the existing printer driver before you re-install.

To install the printer driver in Windows:

For Windows 2000 or Windows NT 4.0, refer to the README.TXT file on the S600 Setup Software & User’s Guide CD-ROM.

1.Turn both the printer and computer off.

2.Make sure the cable between the printer and computer (USB or parallel) is securely connected.

3.Turn the computer on, and close any open software applications. Insert the S600 Setup Software & User’s Guide CD-ROM in the CD-ROM drive. The setup program should run automatically.

If the printer was on when the setup program started, the Add

New Hardware Wizard will appear. Do NOT use the wizard—click

Cancel to close the window and continue.

If the setup program does not run automatically, click Start, then Run, then type x:\msetup.exe (where x is the CD-ROM drive).

4.Read the Welcome screen, then click Next. Read the License Agreement, then click Yes. When the main menu appears, click Install Software.

If a message prompts you to restart Windows, remove the CD-ROM, then click OK. After the computer restarts, re-insert the CD-ROM and continue.

5.Click Start. (If the Start button is not red, select Printer Driver, then click Start.) The printer driver will start loading automatically.

6.TURN THE PRINTER ON so the printer port can be automatically detected. The software will begin identifying the printer port being used.

33