E
Adjusting the Viewfinder Unit
The camera is supplied with the viewfinder unit and cable attached to the camera.
•Check that the viewfinder cable is firmly attached to the camcorder.
•Remove the protective rubber from around the locking screw.
Adjusting for left eye/right eye operation
1, 2 | 3 |
|
Preparation
You can slide the viewfinder unit along the bracket to a position that best suits you — for use with either the left or right eye.
1. Loosen the locking screw and slide the unit to the position you require along the bracket.
2. Tighten the locking screw.
3. Switch the eye cup around (if necessary).
• Slide and hold the release lever on the | Right eye use | Left eye use |
|
| |
underside of the viewfinder and then twist the |
|
|
eye cup |
|
|
the eye cup lines up with the mark on the |
|
|
viewfinder) to allow you to remove it from |
|
|
the viewfinder. Replace, with the eye cup |
|
|
facing the opposite direction, by lining up the |
|
|
marks and twisting the cup clockwise until it |
|
|
locks into place. |
|
|
10
