E

Notes on Using the Batteries

Charging and recording times

These times may vary.

You will get more recording time if you turn the camera off between shots, instead of leaving it in record pause mode.

Recording time will be shorter than usual at low temperatures. You can use the battery pack between 32° and 104°F (0° to 40°C), but it works best between 50° and 86°F (10° to 30°C).

If the battery pack starts to give you much less recording time than usual, it has reached the end of its life and must be replaced.

Battery pack

BP-927

BP-941

 

(supplied)

(option)

 

 

 

Time needed for

3h 50 min.

4h 40 min.

full recharge

 

 

 

Maximum

1h 30 min.

2h 15 min.

recording time

 

 

 

How much power is left?

The indicator in the display shows you approximately how much charge the battery pack has left:

Notes:

“CHANGE THE BATTERY PACK” appears in the display for 4 seconds when the power is completely exhausted. The empty battery mark then appears and starts to flash. The power indicator light also flashes.

The indicator is not constant — different levels will be shown when you subject the battery pack and camcorder to different conditions.

If you use battery packs other than BP-924 and BP-927, the indicator may not show the correct information.

100% 75% 50% 25%

CHANGE THE BATTERY PACK 0%

Additional

Information

When to recharge

You can recharge a lithium ion battery pack whenever it is convenient. However, as the battery pack will naturally discharge itself over time, it is best to charge it the same day you plan to use it, or the day before.

62

Page 62
Image 62
Canon XL1 instruction manual Charging and recording times, How much power is left?, When to recharge