![](/images/new-backgrounds/1288642/28864215x1.webp)
Mounting and Removing XL Lenses
Any lens bearing the mark can be used with this camcorder.
E
Mounting the lens
1.Remove the dust cap from the lens and the body cap from the camcorder.
2.Align the red dot on the camera body with the mount positioning point (the red dot) on the lens, then turn the lens clockwise until it clicks and locks into place.
Preparation
Removing the lens
LENS RELEASE
1.Slide and hold the LENS RELEASE switch and turn the lens
2.When you are not using the lens or camera, be sure to replace the dust cap and body cap.
8