Canon XL1 instruction manual Connections for Playback on a TV Screen

E

Connections for Playback on a TV Screen

You can connect the camera to a TV or VCR in order to play back your recordings. You will need to attach a power source to the camera (see p. 13).

See your TV or VCR instruction manual for further details.

If your TV (or VCR) has an S-video input terminal

	V	STV-150 Stereo Video Cable
		VIDEO
	L	L
1		AUDIO
AUDIO	R
	S	R
		S-VIDEO
		S-150 S-video Cable

•Use the S-150 S-video Cable to connect the S-video terminal d. Use the STV-150 Stereo Video Cable, to connect the AUDIO terminals. Connect the white plug to the white AUDIO terminal 7 (left). Connect the red plug to the red AUDIO terminal 9 (right). Do not connect the yellow plug.

•Set the TV/VIDEO selector on the television to VIDEO.

•If you are connecting the camera to a VCR, set the input selector on the VCR to LINE.

If your TV (or VCR) has audio/video input terminals

Playback

AUDIO 1

V

L

R

S

VIDEO

L

AUDIO

R

STV-150 Stereo Video Cable

•Connect the camera using the STV-150 Stereo Video Cable. Connect the white plug to the white audio terminal 7 (left). Connect the red plug to the red audio terminal 9 (right). Connect the yellow plug to the yellow video terminal 0.

•Set the TV/VIDEO selector on the television to VIDEO.

•If you are connecting the camera to a VCR, set the input selector on the VCR to LINE.

Note:

•If you are going to use the TV as a monitor while you are shooting, remember to keep the TV volume turned down as long as the camera’s audio terminals are connected to prevent feedback.

If your TV is already hooked up to a VCR, you can connect the camera to the VCR instead of the TV. Follow the instructions above.

56