Using the Setup Menu
Configuring Custom Logo Capture Settings
Before capturing a custom logo, configure the following settings to control its position, zoom, and other parameters when it is projected.
Setting | Available Items (Parentheses indicate defaults.) |
|
|
Logo Vertical | Top, (Center), Bottom |
|
|
Logo Horizontal | Left, (Center), Right |
|
|
Custom Logo Zoom | (100%), 200%, Resize Image To Fit |
|
|
Background Color | (White), Black |
|
|
Resolution | (Normal), High |
|
|
zThe “Logo Vertical”, “Logo Horizontal”, and “Background Color” settings are not used when the zoom setting is “Resize Image To Fit”.
zNote that you cannot change the above settings for a custom logo after you capture it.
zThe following are some examples of how the above settings affect the custom logo.
Logo Vertical: Center |
| Logo Vertical: Center |
Logo Horizontal: Center |
| Logo Horizontal: Center |
Custom Logo Zoom: 100% |
| Custom Logo Zoom: 200% |
Background Color: White |
| Background Color: White |
|
|
|
Logo Vertical: Bottom |
| Logo Vertical: Center |
Logo Horizontal: Left |
| Logo Horizontal: Center |
Custom Logo Zoom: 100% |
| Custom Logo Zoom: 100% |
Background Color: White |
| Background Color: Black |
|
|
|
zIf an error occurs with the “High” resolution setting, try changing the resolution setting to “Normal”. This will increase the chance of a successful capture. If you experience problems capturing with the “Normal” setting, it may also mean that the area you are trying to capture is too large. Try selecting a smaller area.
102