
Using the Setup Menu
■Option Settings2 J Power On AF/AK Mode
You can specify either of two different auto adjustment operations to be performed whenever the projector is turned on.
Input Source Specific Menu Items
Input Source | Available Items (Parentheses indicate defaults.) |
|
|
RGB | Continuous AF/AK, (Off) |
|
|
Component |
|
|
|
| |
|
|
VIDEO |
|
|
|
No Signal |
|
|
|
Setting Explanations
Continuous AF/AK: Turning on the projector while this setting is selected displays an alignment chart and performs a continuous Auto Focus operation. Pressing the [AF/AK] key at this time performs auto keystone correction.
Off: | Turning on the projector while this setting is selected restores the |
| focus and keystone correction settings that were in effect when |
| the projector was last turned off. |
Setting Storage
A single setting is stored, which is applied to all input sources.
zWhen Continuous AF/AK is selected as the power on AF/AK mode, a custom logo is not projected when power is turned on even if one is specified as the startup screen (page 87).
zFor more information about Continuous AF/AK, see “Auto Keystone Correction and Auto Focus” (page 53).
zFor information about the focus setting, see “To focus the image” (page 50). For information about keystone correction, see “Keystone Correction (KEYSTONE)” (page 53).
zWhen Continuous AF/AK is turned off, turning off projector power while focus is near its maximum or minimum setting can cause the projected image to be out of focus the next time power is turned on. If this happens, adjust focus manually or press the [AF/AK] key.
107