Using the Setup Menu

4. Input the new password, and then press the [ENTER] key.

zThis displays a dialog box for re-inputting the password for confirmation.

5. Re-input the same password you input in step 4, and then press [ENTER].

zIf the two passwords you input were identical, the message “Your new password has been registered.” appears. Press the [ESC] key.

zIf the password you input here is different from the one you input in step 4 the message “The two passwords you input are different.” appears. Press the [ESC] key to return to step 1.

■Option Settings1 J Custom Logo Settings

With this sub-menu, you can cut part of the projected screen and use it to create an original logo, which you can display for the startup screen, the no signal screen, and the mute screen. An original logo that you create is called a “custom logo”. The custom logo settings let you create a custom logo, view your custom logo, and perform other operations.

zCustom logo settings cannot be configured when there is no input signal.

zA single custom logo is stored, which is applied to all input sources.

Capturing a Custom Logo Image

You can create a custom logo by capturing part of an image that is currently being projected by the projector.

zThe display size and position of a custom logo created by capturing an image depend on the configuration of the following settings when you capture the image: Logo Vertical, Logo Horizontal, Custom Logo Zoom, Background Color, and Resolution. Make sure that you configure these settings the way you want before performing the image capture operation. For details of these operations, see “Configuring Custom Logo Capture Settings” on page 102.

99