Using the Setup Menu

Setting Explanations

Auto:

Select this setting to have the projector switch the video signal system

 

automatically in accordance with the input signal from the video device

 

that is connected to the VIDEO or S-VIDEO input terminal. This is the

 

setting you should normally use.

Other settings: Each setting selects the applicable video system. Use these settings when you want to specify only one specific video signal for the VIDEO and S-VIDEO input terminal.

Setting Storage

This setting is saved for the VIDEO and S-VIDEO input terminal only.

Input Settings J P-in-P Input

This sub-menu lets you select the input source for the image that appears in the P-in-P sub- window (page 59).

Input Source Specific Menu Items

Input Source

Available Items (Parentheses indicate defaults.)

 

 

RGB

(VIDEO), S-VIDEO

 

 

Component

None

 

 

S-VIDEO

 

 

 

VIDEO

 

 

 

No Signal

(VIDEO), S-VIDEO

 

* Only when the currently selected input source is RGB.

Setting Explanations

VIDEO: Select VIDEO as the input source of the sub-window.

S-VIDEO: Select S-VIDEO as the input source of the sub-window.

Setting Storage

This setting is saved for the RGB input terminal only.

90