Using the Setup Menu

■Input Settings J Restore Menu Defaults

This sub-menu returns all of the sub-menu items on the Input Settings main menu to their initial default settings.

zYou can perform initialization even when there is no input signal. In this case, the initialization is performed for the currently selected input source.

zBasically, initialization initializes the settings of the current input source. Note, however, that the signal name indicator setting is always initialized, regardless of the currently selected input source.

zFor details about the initialization procedure, see “To initialize the settings of a particular main menu item” on page 74.

Option Settings1

■Option Settings1 J Auto Input Detect

This sub-menu lets you specify whether auto detect of the input source should be performed whenever the projector is turned on (page 47).

Input Source Specific Menu Items

Input Source

Available Items (Parentheses indicate defaults.)

 

 

RGB

(On), Off

 

 

Component

 

 

 

S-VIDEO

 

 

 

VIDEO

 

 

 

No Signal

 

 

 

Setting Explanations

On: Turns on auto detection of the input source whenever the projector is turned on.

Off: Turns off auto detection of the input source whenever the projector is turned on.

Setting Storage

A single setting is stored, which is applied to all input sources.

92