Using the Setup Menu
2. Perform steps 2 through 4 under “Basic Setup Menu Operations” on page 68. On the “Input Settings” main menu, select the “Video Signal”
3. Press the [ENTER] key.
zThis displays the video signal selection screen shown below.
4. Use the [S] and [T] keys to highlight the item you want to select, and then press the [ENTER] key.
5. After you are finished configuring the settings, press the [ESC] key to close the setting screen and return to the
zAfter you are finished, press the [MENU] key to exit the setup menu.
zNote that the available settings and configuration procedures depend on the setting screen. See “Setup Menu Reference” on page 77 for details about each
72