
Projection Operations
3. Use the [W] and [X] keys to correct for keystoning.
zEach press of [W] or [X] shifts the indicator on the currently selected bar left or right.
zRepeat steps 2 and 3 to perform keystone correction for the other direction, if you want.
4.After the settings are the way you want, press the [ESC] key or the [KEYSTONE] key.
zThis causes the keystone correction screen to disappear.
zThe allowable ranges for manual keystone correction are
Adjusting the Volume Level (VOL +/–)
You can use the remote controller keys to adjust the volume level of the audio that is output from the projector’s speaker.
To adjust the volume level
1. On the remote controller, press the [VOL +] or [VOL
zThis causes the [Volume] screen to appear on the projected image.
2.Press the [VOL +] key or the [X] key to increase the volume, or the [VOL
3.After the setting is the way you want, press the [ESC] key.
zThis causes the [Volume] screen to disappear.
56