Projection Operations

Performing Auto Keystone Correction and Auto Focus while AF/AK is Enabled

Perform the following steps while [AF/AK] is selected for “Option Settings2 J AF/AK Mode” (page 106) on the setup menu.

1. Press the [AF/AK] key.

zThis automatically focuses the image and performs auto keystone correction.

Performing Auto Keystone Correction and Auto Focus while Continuous AF/AK is Enabled

Perform the following steps while [Continuous AF/AK] is selected for “Option Settings2 J AF/ AK Mode” (page 106) on the setup menu.

1. Press the [AF/AK] key.

zThis enters the pre-focus mode, which projects an alignment chart like the one shown below.

zThe size of the alignment chart depends on screen and projector setup conditions.

2. Adjust the angle and position of the projector as required so the projected chart fits within the screen area.

3. Press the [AF/AK] key again.

zThis performs auto keystone correction.

54