Getting Ready

2. To turn off the projector, press the [] (power) key again in response to the confirmation message.

zThis causes the projector lamp to go out and stops projection.

zAlso the POWER/STANDBY indicator starts to flash amber, which indicates that the projector is cooling down. It takes about 120 seconds from the start of cool down until the projector turns off.

zThe projector will not turn back on again while it is cooling down.

zAfter cool down is finished, the POWER/STANDBY indicator on the top of the projector will light amber, which indicates the standby state. You can now turn the projector back on, if you want.

3.After confirming that cool down is complete, unplug the AC power cord from the power outlet.

zNote that the projector may still be quite warm even after it completes its cool down procedure. Before packing up the projector, it is recommended that you check to make sure that the fan is stopped and that the projector is no longer warm.

z This causes the POWER/STANDBY indicator to go out.

4.After ensuring that the projector and the connected computer or video device are turned off, disconnect the connecting cables from the projector and the connected device.

5.Close the front cover.

Auto Power Off

Auto Power Off automatically turns off the projector whenever there is no input signal from the currently selected input source, and no operation is performed on the projector for about 10 minutes.

When Auto Power Off is triggered, the projector first enters a cool down state, the same as it does when you press the [ ] (power) key to turn it off.

zThe POWER/STANDBY indicator flashes amber to indicate that the projector is cooling down. It takes about 120 seconds from the start of cool down until the projector turns off.

zThe projector will not turn back on again while it is cooling down.

zAfter cool down is finished, the POWER/STANDBY indicator on the top of the projector to lights amber, which indicates the standby state. You can now turn the projector back on, if you want.

zYou can turn off Auto Power Off, if you want. See “Option Settings1 J Auto Power Off” on page 94.

45