Using the Setup Menu
zBesides the menu operation explained above, the following operations can also be used
to turn off key lock.
zWhile the projector is on: Hold down the projector’s [ESC] key for about five seconds.
zWhile the projector is off: Simultaneously hold down the projector’s [ESC] and [
] (power) keys for about five seconds. This turns on the projector and also turns off key lock.
zYou can use the above projector operations to turn off key lock if the remote controller batteries unexpectedly go dead, etc.
■Option Settings1 J Power On Password
This
While the password is turned on, projector operation is impossible unless the correct password is entered.
Initial Factory Default Password
The following is the
[AF/AK], [PAGUP], [PAGEDOWN], [S], [T], [W], [X], [MENU]
zNote that the projector’s password is not really a “word”, but rather a series of remote controller key operations.
zIf you need to keep projector operation secure, be sure to change the initial factory default password to a different one as soon as possible.
zThe password can be input using the remote controller only. Optimum security is ensured by turning on the password and keeping the remote controller with you.
zIf you forget your password, contact your original dealer or authorized CASIO Service Center. There, your projector will be initialized to its initial factory default settings. In addition to the password, all other projector settings (except for the lamp time) will be returned to their initial factory defaults.
95