Using the Setup Menu

Before Configuring Menu Settings

Always remember that the settings you configure on the setup menu are applied for the input source (RGB, Component, S-VIDEO, VIDEO) that was selected when you displayed the setup menu. Note the following important points.

zThe items that appear on the setup menu depend on the currently selected input source and other factors.

Some items apply to a certain specific input source, while some apply to multiple input sources.

zEven for menu items that are common to multiple input sources, the setting range or selectable options may differ according to the input source.

zWith certain exceptions, there are basically two types of settings that can be configured for multiple input sources. One type lets you configure different settings for each individual input source. The other type applies a single setting to all input sources. The volume level setting, for example, lets you configure a different setting for each input source, while the keystone correction setting lets you configure a single common setting for all input sources.

zFor details about how settings are saved, and other details, see “Setup Menu Reference” on page 77.

67