Casio XJ-450 Loading Remote Controller Batteries, To load remote controller batteries

Remote Controller

Loading Remote Controller Batteries

Before you can use the remote controller for the first time, you need to load the two batteries that come with it.

zBe sure to use alkaline batteries only.

Replace remote controller batteries with a set of new ones whenever the remote controller does not work or if you need to move the remote controller very close to the projector before it will work.

Misuse of batteries can cause them to leak and stain of the area around them, or to explode, creating the risk of fire and personal injury. Make sure that you always observe the following precautions.

z Take care that batteries are oriented correctly when you load them.

Caution z

Never mix old batteries and new ones.

zNever mix batteries of different types.

zUse only battery type that is specified for use with the remote controller.

To load remote controller batteries

1. Remove the battery cover from the back of the remote controller.

z If there are old batteries inside the case, remove them.

27