Using the Setup Menu
■Option Settings1 J Restore Menu Defaults
This
zYou can perform initialization even when there is no input signal. In this case, the initialization is performed for the currently selected input source.
zThe Auto Adjust item is initialized only when RGB is selected as the input source. All other items are always initialized, regardless of the currently selected input source.
zFor details about the initialization procedure, see “To initialize the settings of a particular main menu item” on page 74.
Option Settings2■Option Settings2 J AF/AK Mode
This
Input Source Specific Menu Items
Input Source | Available Items (Parentheses indicate defaults.) |
|
|
RGB | (AF/AK), Continuous AF/AK, AF |
|
|
Component |
|
|
|
| |
|
|
VIDEO |
|
|
|
No Signal |
|
|
|
Setting Explanations
AF/AK: | Assigns the AF/AK Mode to the [AF/AK] key. Pressing the [AF/ |
| AK] key while this setting is selected performs Auto Focus and |
| auto keystone correction. |
Continuous AF/AK: | Assigns the Continuous AF/AK Mode to the [AF/AK] key. |
| Pressing the [AF/AK] key while this setting is selected displays |
| an alignment chart and performs a continuous Auto Focus |
| operation. Pressing the [AF/AK] key again performs auto keystone |
| correction. |
AF: | Assigns the AF Mode to the [AF/AK] key. Pressing the [AF/AK] |
| key while this setting is selected performs Auto Focus only. |
Setting Storage
A single setting is stored, which is applied to all input sources.
zFor details about [AF/AK] key operation and the various modes that can be assigned to it (AF/AK Mode, Continuous AF/AK Mode, AF Mode), see “Auto Keystone Correction and Auto Focus” (page 53).
106