Safety Precautions
●Projector cabinet
Never open the projector’s cabinet. Doing so creates the risk of electric shock.
●Cleaning
Before cleaning the projector, be sure to turn it off and unplug it from the power outlet. Failure to do so creates the risk of electric shock.
●Heavy objects
Never place heavy objects on the projector or climb on top of the projector. Doing so creates the risk of fire and electric shock.
●Water
Never locate the projector in a bathroom or anywhere else there is the chance that it will be splashed with water.
●Exhaust vents
The exhaust vents become very hot while the projector is running. Never touch them. Doing so creates the risk of burn injury. The areas near the exhaust vents also become quite hot. Never locate objects made of plastic or other
●Front cover
Be sure to open the front cover before turning on the projector. Never close the front cover while the projector is in use.
●Location
Never locate the projector in any of the following types of locations. Doing so creates the risk of fire and electric shock.
•Near an area subject to strong vibration
•An area subject to large amounts of moisture or dust
•In a kitchen or other area exposed to oil smoke
•Near a heater, on a heated carpet, or in an area exposed to direct sunlight
•An area subject to temperature extremes (Operating temperature range is 5°C to 35°C (41 to 95 °F)).
●Unstable location
Never place the projector on an unstable surface or on a high shelf. Doing so can cause it to fall, creating the risk of personal injury.
●Using the projector on a base
with casters
Whenever using the projector on a base that has casters, make sure that you lock the casters when not moving the base.
●Lightening
During a lightening storm, do not touch the plug of the projector’s power cord.
●Remote controller
Never try to take the remote controller apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, and other personal injury. Be sure to leave all internal inspection, adjustment, and repair up to your original dealer or authorized CASIO Service Center. Never allow the remote controller to become wet. Water creates the risk of fire and electric shock.
6