Using the Setup Menu

Input Settings

■Input Settings J RGB Input

This sub-menu lets you specify the type of input signal in accordance with the device connected to the projector’s RGB terminal.

Input Source Specific Menu Items

Input Source

Available Items (Parentheses indicate defaults.)

 

 

RGB

(RGB), Component

 

 

Component

 

 

 

S-VIDEO

None

 

 

VIDEO

 

 

 

No Signal

(RGB), Component

 

* Only when the currently selected input source is RGB or

 

Component.

 

 

Setting Explanations

RGB:

Select this setting when a computer is connected to the projector’s RGB

 

input terminal. For details about connection, see “Connecting a Computer

 

to the Projector (Video and Audio)” on page 37.

Component: Select this setting when the projector’s RGB input terminal is connected the component video output terminal of a video device using an optionally available YK-3 component video cable. For details about connection, see “Connecting to a Component Video Output Device” on page 40.

Setting Storage

This setting is saved for the RGB input terminal only.

■Input Settings J Video Signal, S-Video Signal

This sub-menu specifies the input signal for the projector’s VIDEO and S-VIDEO input terminals.

Input Source Specific Menu Items

Input Source

Available Items (Parentheses indicate defaults.)

 

 

RGB

None

 

 

Component

 

 

 

S-VIDEO

(Auto), NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

 

 

VIDEO

 

 

 

No Signal

(Auto), NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

 

* Only when the currently selected input source is VIDEO or

 

S-VIDEO.

 

 

89