Programming Reference
Revision Sheet
Firmware |
|
|
Version | 3.00.01 | 3.00.02 |
Command |
|
|
FS 2 | Can only be used in Japanese | Add Traditional and Simplified Chinese |
Define |
| fonts |
|
|
|
US B |
| Cancelled |
IrDA setting |
|
|
|
|
|
US C |
| Bluetooth Setting- |
Bluetooth setting |
| Cancel Enable/Disable parameter |
|
|
|
US b |
| Cancelled |
Get IrDA configurations |
|
|
|
|
|
RS i | Can only draw line / box | Add draw circle function, parameters and |
Draw graphics |
| bytes are different |
|
|
|
US 7 | [Default] n1=1; n2=0 | [Default] n1=1; n2=1 |
Paper sensor setting |
|
|
|
|
|
US g | Paper Sensor Setting | Paper Sensor Setting |
Get printer configuration | 0x01: Reflective, Light from bottom to top | 0x01: Reflective, Light from top to bottom |
| 0x05: Reflective top to bottom | 0x05: Reflective bottom to top |
|
|
|
This Programming Reference (Rev. 2.2) is applied for firmware 3.00.02 version.
If your printer is used the previous firmware 3.00.01 version, please upgrade the firmware to 3.00.02 version.