FS S

VERSAJET

 

 

 

[Name]

Set left- and right-side Kanji character spacing

 

Programming Reference

 

 

 

[Format]

ASCII

FS S n1 n2

 

 

 

 

 

 

 

Hex

1C 53 n1 n2

 

 

 

 

Decimal

28 83 n1 n2

 

 

 

[Range]

0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255

 

 

 

[Default]

n1= 0, n2= 0

 

 

 

 

[Description]

Sets left- and right-side Kanji characters spacing n1 and n2.

 

 

 

 

When the printer model used supports GS P, the left-side character spacing is [n1x

horizontal or vertical motion units] and the right-side character spacing is [n2x horizontal or vertical motion units].

[Notes]

When double-width mode is set, the left- and right-side character spacing is twice the normal value.

The horizontal and vertical motion units are set by GS P. The previously specified character spacing does not change, even if the horizontal or vertical motion unit is changed using GS P.

The value cannot be less than the minimum horizontal movement amount, and must be in even units of the minimum horizontal movement amount.

75