VERSAJET

Programming Reference

For process of QR Code symbol (when cn = 49)

 

 

The symbol data specified by Function 080 d1...dk is stored in the printer and is printed by the specification of Function 081. The symbol data in the save area is reserved until the following processing is performed:

Function 080 or 180 or 980 is executed. ESC @ is executed.

The printer is reset or the power is turned off.

Executing function 181 after executing Function 180 respectively prints the same symbol data.

By using Functions 165, 167, 169 combined with Function 181, the same symbol data d1...dk is printed differently.

This model supports two-dimensional code (PDF417 ). When printing PDF417 with this printer, note the following:

The recognition rate of the symbol is affected by the height of the symbol, module height, module width ratio, and the performance of the reader.

It is recommended that the module height be set three to five times the width of the module.

The module height is specified by Function 068. The width of a module is specified by Function 067. The number of the rows is specified by Function 066.

91