VERSAJET
Programming Reference
Supported Commands
In these tables, click any name to see the command description. Please refer following instructions before you utilize these commands to configure your VersaJet:
Standard mode
| : | Enabled. |
( ) | : | Enabled only when the command is used at the beginning of command codes. |
| : Enabled only when data is not present in the printer buffer. | |
Ignored | : | All command codes including parameters are ignored. |
Page mode
| : | Enabled. | |
| : Only for value setting. | ||
Disabled | : | Parameters are processed as printable data. | |
Ignored | : | All command codes including parameters are ignored. | |
Classification |
|
| |
Executing |
| : | The changes do not affect the following data. |
Setting |
| : | The changes do affect the following data until power off. |
Note : The changes caused by “Flash Command” will be still valid after power on/off
.
15