VERSAJET

Programming Reference

[Notes]

After setting the current serialization value in the print buffer as print data, the printer updates serialization value based on the count mode set before stored in the print buffer.

In count-up mode, the serialization value is updated as [serialization value + increment value]

In count-down mode, the serialization value is updated as [serialization value – decrement value].

In count-stop mode, the serialization is not updated.

The serialization value in the print buffer is printed when the printer receives a print command.

All serialization settings should be adequate for text or bar code rules. If any improper data is included, it will result as a command error.

Serialization is set by RS q command.

196