ESC SP

VERSAJET

 

 

 

[Name]

Set right-side character spacing

 

Programming Reference

 

 

 

[Format]

ASCII

ESC SP n

 

 

 

 

 

 

Hex

1B 20 n

 

 

 

 

Decimal

27 32 n

 

 

 

[Range]

0≦n≦255

 

 

 

 

[Default]

n = 0

 

 

 

 

[Description]

Sets the right-side character spacing to nx (horizontal or vertical motion unit).

 

 

 

[Notes]

 

 

The character spacing set by this command is effective for alphanumeric and user-defined character.

When characters are enlarged, the character spacing is n times normal value. The character spacing for double-width mode is twice the normal value.

When standard mode is selected, the horizontal motion unit is used.

When page mode is selected, the vertical or horizontal motion unit is used for the print direction set by ESC T.

When the starting position is set to the upper left or lower right of the printing area using ESC T, the horizontal motion unit is used.

When the starting position is set to the upper right or lower left of the printing area using ESC T, the vertical motion unit is used.

Settings of this command are effective until ESC @ is executed, the printer is reset, or the printer is turned off.

It is used to change the spacing between characters.

35