Cisco Systems 15454 4.2 OC3 IR 4/STM1 SH 1310 Card

4-5

Cisco ONS 15454 Reference Manual, R7.0

78-17191-01

Chapter 4 Optical Cards

4.2 4.2 OC3 IR 4/STM1 SH 1310 Card

4.2 OC3 IR 4/STM1 SH 1310 Card

Note For hardware specifications, see the “A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications” section on

page A-25. See Table 4-2 on page 4-4 for optical card compatibility.

OC3 IR /STM1 SH 1310-8 — — — — — — — Yes Yes — Yes — Yes Yes Yes

OC12 IR/STM4 SH 1310 Yes Yes Yes Yes Yes Ye s Yes Yes Ye s — Yes — Yes Yes Yes

OC12 IR 1310 Yes Yes Yes Yes Yes Ye s Yes Yes Ye s — Yes — Yes Yes Yes

OC12 LR 1310 Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes

OC12 LR 1550 Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes

OC12 LR/STM4 LH 1310 Yes Yes Yes Yes Yes Yes Ye s Yes Yes — Ye s — Ye s Yes Ye s

OC12 LR/STM4 LH 1550 Yes Yes Yes Yes Yes Yes Ye s Yes Yes — Ye s — Ye s Yes Ye s

OC12 IR/STM4 SH 1310-4 — — — — — Yes Yes Yes Yes — Ye s — Ye s Yes Ye s

OC48 IR 1310 Yes Yes Yes Yes Yes Ye s Yes Yes Ye s — Yes — Yes Yes Yes

OC48 LR 1550 Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes

OC48 IR/STM16 SH AS 13102— — — Yes Yes Ye s Yes Yes Ye s — Yes — Yes Yes Ye s

OC48 LR/STM16 LH AS 15503— — — Yes Yes Ye s Yes Yes Ye s — Yes — Yes Yes Ye s

OC48 ELR/STM16 EH 100 GHz Ye s Yes Yes Yes Yes Yes Ye s Yes Yes — Ye s — Yes Ye s Yes

OC48 ELR 200 GHz Yes Yes Yes Yes Yes Ye s Yes Yes Ye s — Yes — Yes Yes Yes

OC192 SR/STM64 IO 1310 — — — — — — — Yes Yes — Yes — Yes Yes Yes

OC192 IR/STM64 SH 1550 — — — — — — — Yes Yes — Yes — Yes Yes Yes

OC192 LR/STM64 LH 1550

(15454-OC192LR1550) — — — Yes Yes Ye s Yes Yes Ye s — Yes — Yes Yes Ye s

OC192 LR/STM64 LH 1550

(15454-OC192-LR2) — — — — — — — Yes Yes — Yes — Yes Yes Yes

OC192 LR/STM64 LH ITU 15xx.xx — — — — — — — Yes Yes — Yes — Yes Yes Yes

15454_MRC-12 — — — ——————— —— —YesYes

OC192SR1/STM64IO Short

Reach and OC192/STM64 Any

Reach4

— — — ——————— —— —YesYes

1. DWDM-only release.

2. To enable OC-192 and OC-48 any-slot card operation, use the XC10G or XC-VXC-10G card, the TCC+/TCC2/TCC2P card, Software R3.1 or later, and the

15454-SA-ANSI or 154545-SA-HD shelf assembly. Note that the TCC+ card is not compatible with Software 4.5 or later.

3. To enable OC-192 and OC-48 any-slot card operation, use the XC10G or XC-VXC-10G card, the TCC+/TCC2/TCC2P card, Software R3.1 or later, and the

15454-SA-ANSI or 154545-SA-HD shelf assembly. Note that the TCC+ card is not compatible with Software 4.5 or later.

4. These cards are designated as OC192-XFP in CTC.

Table 4-2 Optical Card Software Release Compatibility (continued)

Optical Card R2.2.1 R2.2.2 R3.0.1 R3.1 R3.2 R3.3 R3.4 R4.0 R4.1 R4.51R4.6 R4.71R5.0 R6.0 R7.0