16-15
Cisco ONS 15454 Reference Manual, R7.0
78-17191-01
Chapter 16 SNMP
16.7 16.7.2 Variable Trap Bindings
F
(cont.)
(10) cerent454ThresholdLocation Indicates whether the event
occurred at the near or far end.
(11) cerent454ThresholdPeriod Indicates the sampling interval
period.
(12) cerent454ThresholdSetValue The value of this object is the
threshold provisioned by the
NMS.
(13) cerent454ThresholdCurrentValue —
(14) cerent454ThresholdDetectType —
(15) snmpTrapAddress The address of the SNMP trap.
G All other traps (from
CERENT-454-MIB) not
listed above
(1) cerent454NodeTime The time that an event occurred.
(2) cerent454AlarmState The alarm severity and
service-affecting status.
Severities are Minor, Major, and
Critical. Service-affecting
statuses are Service-Affecting
and Non-Service Affecting.
(3) cerent454AlarmObjectType The entity that raised the alarm.
The NMS should use this value to
decide which table to poll for
further information about the
alarm.
(4) cerent454AlarmObjectIndex Every alarm is raised by an object
entry in a specific table. This
variable is the index of objects in
each table; if the alarm is
interface-related, this is the index
of the interface in the interface
table.
(5) cerent454AlarmSlotNumber The slot of the object that raised
the alarm. If a slot is not relevant
to the alarm, the slot number is
zero.
(6) cerent454AlarmPortNumber The port of the object that raised
the alarm. If a port is not relevant
to the alarm, the port number is
zero.
(7) cerent454AlarmLineNumber The object line that raised the
alarm. If a line is not relevant to
the alarm, the line number is zero.
Table 16-8 ONS 15454 SNMPv2 Trap Variable Bindings (continued)
Group
Trap Name(s) Associated
with
Variable
Binding
Number SNMPv2 Variable Bindings Description