Cisco Systems 15454 C.2 Card Default Settings

C-2

Cisco ONS 15454 Reference Manual, R7.0

78-17191-01

Appendix C Network Element Defaults

C.2 C.2 Card Default Settings

settings except those relating to protection (1+1 bidirectional switching, 1+1 reversion time, 1+1

revertive switching, bidirectional line switched ring [BLSR] ring reversion time, BLSR ring revertive

switching, BLSR span reversion time, and BLSR span revertive switching), which apply to subsequent

provisioning.

Note Changing some node-level provisioning via NE defaults can cause CTC disconnection or a

reboot of the node in order for the provisioning to take effect. Before you change a default, check

in the Side Effects column of the Defaults editor (right-click a column header and select Show

Column > Side Effects) and be prepared for the occurrence of any side effects listed for that

default.

C.2 Card Default Settings

The tables in this section list the default settings for each SONET card. Cisco provides several types of

user-configurable defaults for Cisco ONS 15454 optical, electrical, storage access networking, and

Ethernet (or data) cards. Types of card defaults can be broadly grouped by function, as outlined in the

following subsections. For information about individual card settings, refer to the “Change Card

Settings” chapter of the Cisco ONS 15454 Procedure Guide.

Note When the card level defaults are changed, the new provisioning done after the defaults have changed is

affected. Existing provisioning remains unaffected.

Note To view DWDM card defaults consult the Cisco ONS 15454 DWDM Reference Manual.

The following types of defaults are defined for SONET cards.

Most card and port-level configuration defaults correspond to settings found in the CTC card-level

Provisioning tabs.

Note The full set of Automatic Laser Shutdown (ALS) configuration defaults can be found in the CTC

card-level Maintenance > ALS tab for supported cards. ALS defaults are supported for OC3-8,

OC-48ELR, OC-192, OC192-XFP, and MRC-12 cards.

Configuration defaults that correspond to settings that are reachable from the CTC card-level

Provisioning tabs (except as noted) include the following types of options (arranged by CTC subtab):

• Line—(DS-N, EC1-12, OC-N, MRC-12, G-series, and CE-series cards) Line-level configuration

settings.

Note MRC-12 line configuration defaults are defined on a per OC-N rate basis.

• SONET STS—(OC-N and EC1-12 cards) SONET STS-level configuration settings.