9-5
Cisco ONS 15454 Reference Manual, R7.0
78-17191-01
Chapter 9 Security
9.2 9.2.1 User Privileges by CTC Action
Table 9-2 shows the actions that each user privilege level can perform in network view.
1. The X symbol indicates that the user can perform the actions.
2. The — symbol indicates that the privilege to perform an action is not available to the user.
3. Provisioner user cannot change node name, contact, or AIS-V insertion on STS-1 signal degrade (SD) parameters.
4. The action buttons in the subtab are active for all users, but the actions can be completely performed only by the users with the required security levels.
Table 9-2 ONS 15454 Security Levels—Network View
CTC Tab Subtab [Subtab]: Actions Retrieve Maintenance Provisioning Superuser
Alarms — Synchronize/Filter/Delete
cleared alarms
X1
1. The “X” indicates that the user can perform the actions.
XXX
Conditions — Retrieve/Filter X X X X
History— Filter XXXX
Circuits Circuits Create/Edit/Delete — —2
2. The “—” indicates that the privilege to perform an action is not available to the user.
XX
Filter/Search X X X X
Rolls Complete, Force Valid Signal,
Finish
—— X X
Provisioning Security Users: Create/Delete — — — X
Users: Edit Same user Same user Same user All users
Active logins:
Logout/Retrieve Last Activity
Time
———X
Policy: Change — — — X
Alarm Profiles Store/Delete3
3. The action buttons in the subtab are active for all users, but the actions can be completely performed only by the users with the required security levels.
—— X X
New/Load/Compare/
Available/Usage
XXXX
BLSR Create/Delete/Edit/Upgrade — — X X
Overhead Circuits Create/Delete/Edit/Merge — — X X
Search XXXX
Provisionable
Patchcords (PPC)
Create/Edit/Delete — — X X
Server Trails Create/Edit/Delete — — X X
Maintenance Software Download/Cancel — X — X
Diagnostic OSPF Node Information:
Retrieve/Clear
XXXX