Cisco Systems 15454 - page 692

C-76
Cisco ONS 15454 Reference Manual, R7.0
78-17191-01
Appendix C Network Element Defaults
C.3 C.3 Node Default Settings
• BITS Timing settings—Set the AIS threshold, Admin SSM, coding, facility type, framing, state, and
line build-out (LBO) settings for building integrated timing supply 1 (BITS-1) and BITS2 timing.
• General Timing settings—Set the mode (External, Line, or Mixed), quality of reserved (RES) timing
(set the rule that defines the order of clock quality from lowest to highest), revertive, reversion time,
and SSM message set for node timing.
Note Any node level defaults changed using the Provisioning > Defaults tab, changes existing node level
provisioning. Although this is service affecting, it depends on the type of defaults changed, for example,
general, and all timing and security attributes. The “Changing default values for some node level
attributes overrides the current provisioning.” message is displayed. The Side Effects column of the
Defaults editor (right-click a column header and select Show Column > Side Effects) explains the effect
of changing the default values. However, when the card level defaults are changed using the
Provisioning > Defaults tab, existing card provisioning remains unaffected.
Note For more information about each individual node setting, refer to the “Change Node Settings” chapter
of the Cisco ONS 15454 Procedure Guide.
Table C-20 Node Default Settings
Default Name Default Value Default Domain
NODE.circuits.SendPDIP FALSE TRUE, FALSE
NODE.circuits.State IS,AINS IS, OOS,DSBLD,
OOS,MT, IS,AINS
NODE.circuits.upsr.AllowUpsrOverOnePlusOne FALSE TRUE, FALSE
NODE.circuits.upsr.ReversionTime 5.0 (minutes) 0.5, 1.0, 1.5 .. 12.0
NODE.circuits.upsr.Revertive FALSE TRUE, FALSE
NODE.circuits.upsr.STS_SDBER 1E-6 1E-5, 1E-6, 1E-7, 1E-8,
1E-9
NODE.circuits.upsr.STS_SFBER 1E-4 1E-3, 1E-4, 1E-5
NODE.circuits.upsr.SwitchOnPDIP FALSE TRUE, FALSE
NODE.circuits.upsr.VT_SDBER 1E-6 1E-5, 1E-6, 1E-7, 1E-8
NODE.circuits.upsr.VT_SFBER 1E-4 1E-3, 1E-4, 1E-5
NODE.general.DefaultsDescription Factory
Defaults
Free form field
NODE.general.InsertAISVOnSDP FALSE TRUE, FALSE
NODE.general.NtpSntpServer 0.0.0.0 IP Address
NODE.general.RaiseConditionOnEmptySlot FALSE TRUE, FALSE
NODE.general.SDPBER 1E-6 1E-5, 1E-6, 1E-7, 1E-8,
1E-9
NODE.general.ShowLoopbackAlarmsOnPortsUndergoingMaintenance FALSE FALSE, TRUE