17-48
Cisco ONS 15600 Procedure Guide, R8.0
Chapter17 DLPs E100 to E199
DLP- E159 Manually Lock or Unlock a User on Multiple Nodes
Step 6 Click OK.
Step 7 Return to your originating procedure (NTP).
DLP-E159 Manually Lock or Unlock a User on Multiple Nodes
Step 1 From the View menu, chose Go To Network View.
Step 2 Click the Provisioning > Security > Users tabs.
Step 3 Click the user you want to lock out.
Step 4 Click Change.
Step 5 Complete one of the following:
•To lock a user out so the user cannot log into nodes on the network, check the Locked out check box.
•If the user is currently locked out, uncheck the Locked out check box.
See the “DLP-E130 Change Security Policy on a Single Node” task on page 17-26 for more
information about manual lockouts and lockout duration.
Step 6 Click OK. A confirmation dialog box appears.
Step 7 Click OK. Confirm that the changes appear; if not, repeat the task.
Step 8 Return to your originating procedure (NTP).
Purpose This task manually locks out or unlocks a user from multiple nodes.
Tools/Equipment None
Prerequisite Procedures DLP-E26 Log into CTC, page 16-33
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Superuser