TapeAlert Messages

TapeAlert Messages and Descriptions

No.

Flag

 

Type

Displayed Message

Additional Action

 

Information

 

 

 

 

 

 

 

 

 

 

31

Hardware B

C

The tape drive has a

Power off the tape drive

 

 

 

 

hardware fault:

and attempt the operation

 

 

 

 

1. Turn the tape drive off

again.

 

 

 

 

 

 

 

 

 

and then on again.

 

 

 

 

 

2. Restart the operation.

 

 

 

 

 

3. If the problem persists,

 

 

 

 

 

call the tape drive

 

 

 

 

 

supplier helpline.

 

 

 

 

 

Check the tape drive users

 

 

 

 

 

manual for device specific

 

 

 

 

 

instructions on turning the

 

 

 

 

 

device power on and off.

 

 

 

 

 

 

 

32

Interface

 

W

The tape drive has a

If the problem persists, call

 

 

 

 

problem with the host

the tape drive supplier

 

 

 

 

interface:

helpline.

 

 

 

 

1. Check the cables and

 

 

 

 

 

cable connections.

 

 

 

 

 

2. Restart the operation.

 

 

 

 

 

 

 

34

Download

 

W

The firmware has failed

Call the tape drive supplier

 

Fail

 

 

because you have tried to

helpline for more

 

 

 

 

use the incorrect firmware

information.

 

 

 

 

for this tape drive. Obtain

 

 

 

 

 

the correct firmware and

 

 

 

 

 

try again.

 

 

 

 

 

 

 

Table C-2TapeAlert Library Error Messages

 

C-6