Installing the Tape Library

Step 4: Mount the Library in a Rack (optional)

4.Attach the rear bracket:

a.Adjust the rear mounting brackets to fit lengthwise in the rack.

b.Attach the rear slide mounting bracket to the rear clip nuts using two 10-32 x 5/8 pan slotted phlp screws.

c.Push the slides as far as possible toward the outside of the rack.

d.Tighten the screws.

e.Tighten all bracket screws.

Figure 1-9 Rear Bracket on Rack

5. Extend the slides fully, make sure they are parallel, and then recompress them.

Installation

1-15