NOTE

Table 3-1

Operating the Library

Setting and Viewing SCSI IDs

Setting and Viewing SCSI IDs

1 2 → ADMIN * → SCSI IDs *

The tape library has a Fast/Wide SCSI interface. SCSI addresses can be set from:

•0 to 7 on a DLT 4000-based library

•0 to 15 on a DLT 7000-based library

If connecting to a narrow host, use only addresses 0 to 7.

When you choose SCSI IDs, you have two options:

•SET IDs * lets you assign individual SCSI IDs to each drive in the library and to the library controller.

•VIEW IDs * lets you see the current drive and library controller settings.

The following table shows the default settings:

Default SCSI IDs
DEVICESCSI IDBUS #

 

 

 

LIB ID

6

Bus 1

 

 

 

DRV 1 ID

5

Bus 1

 

 

 

DRV 2 ID (two-drive models only)

4

Bus 2

 

 

 

If you are already using any of these IDs for your computer or another SCSI peripheral device, follow the instructions in “Setting SCSI IDs” on page 3-12.

To view the current SCSI address settings, see “Viewing Current SCSI Address Settings” on page 3-14.

Operation Library

3-11