TapeAlert Messages

 

 

 

 

TapeAlert Messages and Descriptions

 

 

 

 

 

 

No.

Flag

Type

Displayed Message

Additional Action

 

Information

 

 

 

 

 

 

 

 

 

 

 

 

 

14

Library

W

There is a potential

Inspect the library to see if

 

 

 

Place Retry

 

problem with the library

any visible problems exist.

 

 

 

 

mechanism placing a

Insert a cartridge and try

 

 

 

 

 

cartridge into a slot. This

 

 

 

 

the operation again.

 

 

 

 

 

warning is for information

 

 

 

 

 

 

 

 

 

 

purposes only. No action

 

 

 

 

 

 

needs to be taken at this

 

 

 

 

 

 

time. If the problem

 

 

 

 

 

 

persists, call the tape drive

 

 

 

 

 

 

supplier helpline.

 

 

 

 

 

 

 

 

 

15

Library

W

There is a potential

Inspect the library to see if

 

 

 

Load Retry

 

problem with a drive or the

any visible problems exist.

 

 

 

 

library mechanism loading

Insert a cartridge and try

 

 

 

 

cartridges, or an

the operation again.

 

 

 

 

incompatible cartridge.

Inspect the cartridge to

 

 

 

 

 

verify compatibility.

 

 

 

 

 

Call the library supplier

 

 

 

 

 

helpline if problems persist.

 

 

 

 

 

 

 

16

Library Door

C

The operation has failed

Inspect the library to see if

 

 

 

 

 

because the library door is

any visible problems exist.

 

 

 

 

open:

Insert a cartridge and try

 

 

 

 

 

 

 

 

 

 

1. Clear any obstructions

the operation again.

 

 

 

 

from the library door.

 

 

 

 

 

 

2. Eject any magazine and

 

 

 

 

 

 

 

 

TapeAlert

 

 

 

then insert it again.

 

 

 

 

 

 

 

 

 

 

 

3. If the fault does not clear,

 

 

 

 

 

 

turn the library off and

 

 

Messages

 

 

 

then on again.

 

 

 

 

 

 

 

 

 

 

 

4. If the problem persists,

 

 

 

 

 

 

call the library supplier

 

 

 

 

 

 

helpline.

 

 

 

 

 

 

 

 

 

 

C-9