Operating the Library

Entering the Administration Menu Password

Entering the Administration Menu Password

1 2 → ADMIN * → CONFIG *

A numeric password is required to access options beneath ADMIN* menu of the library (see Figure 3-2 on page 3-8). A three-part default password of 000-000-000 is set at the factory. To change the password, see “Setting a New Administration Menu Password” on page 3-10.

To enter the password:

1.Verify that the drive status displays. If it does not display, press CANCEL until it does.

2.Press NEXT until ADMIN * displays, then press ENTER.

3.PSWD 000-000-000displays, and the first set of zeros flashes.

Press ENTER to accept this number (if no password has been set), or press NEXT or PREV until the correct number displays. Press ENTER.

4.The middle set of zeros flashes.

Press ENTER to accept this number (if no password has been set), or press NEXT or PREV until the correct number displays. Press ENTER.

5.The last set of zeros flashes.

6.Press ENTER to accept this number (if no password has been set), or press NEXT or PREV until the correct number displays.

7.Press ENTER. INFO * displays.

To access options under the ADMIN * menu, press PREV or NEXT until the desired option displays, then press ENTER.

Operation Library

3-9