TapeAlert Messages

TapeAlert Messages and Descriptions

No.

Flag

Type

Displayed Message

Additional Action

Information

 

 

 

 

 

 

 

 

 

4

Hardware D

C

The library has a hardware

Inspect the library to make

 

 

 

fault:

sure all connections are

 

 

 

1. Turn the library off and

secure and tapes inserted

 

 

 

correctly.

 

 

 

then on again.

 

 

 

 

 

 

 

2. Restart the operation.

 

 

 

 

3. If the problem persists,

 

 

 

 

call the library supplier

 

 

 

 

helpline.

 

 

 

 

Check the library users

 

 

 

 

manual for device specific

 

 

 

 

instructions on turning the

 

 

 

 

device power on and off.

 

 

 

 

 

 

6

Library

C

The library has a problem

If the problem persists, call

 

Interface

 

with the host interface:

the library supplier

 

 

 

1. Check the cables and

helpline.

 

 

 

 

 

 

 

cable connections.

 

 

 

 

2. Restart the operation.

 

 

 

 

 

 

13

Library Pick

W

There is a potential

Inspect the library to see if

 

Retry

 

problem with a drive

any visible problems exist.

 

 

 

ejecting cartridges short or

Insert a cartridge and try

 

 

 

with the library mechanism

 

 

 

the operation again.

 

 

 

picking a cartridge from a

 

 

 

 

 

 

 

slot. This warning is for

 

 

 

 

information purposes only.

 

 

 

 

No action needs to be taken

 

 

 

 

at this time. If the problem

 

 

 

 

persists, call the tape drive

 

 

 

 

supplier helpline.

 

 

 

 

 

 

C-8