| Operating the Library |
| |
| Running an Internal Test |
| |
|
|
|
|
Test Name | Description |
|
|
|
|
|
|
PLUNGE FULL | Allows the cartridge transport mechanics to run at full speed. This setting should |
|
|
SPD | always be used under normal library operations. |
|
|
|
|
|
|
PLUNGE 1/2 SPD | Used by service personnel only. Allows the cartridge transport mechanics to run |
|
|
| at half speed. |
|
|
|
|
|
|
SENSOR | Tests the horizontal path that the cartridge transport mechanism follows when |
|
|
TRANSLATE | moving from one stack of tape cartridges to another. Displays ON or OFF. If OFF |
|
|
| displays, the sensor is block. (This display is automatically updated if the sensor |
|
|
| status change.) Requires the use of one tape cartridge. |
|
|
| Library | ||
|
|
| |
SENSOR | The displays shows M1 1 M2 1 M3 1. Each “1” indicates that the caddy is in |
| |
|
| ||
MAGAZINE | place. If a “0” is displayed, the caddy has not been inserted into the library. (This |
|
|
| display is automatically updated if the sensor status changes.) |
| Operation |
|
|
| |
SENSOR | The display shows 0 0. |
| |
|
| ||
STARWARS | Each “0” indicates one of the paths that the cartridge transport mechanism |
|
|
|
|
| |
| follows in front of each stack of tape cartridges. If the path is clean, a 0 displays; |
|
|
| if the path is blocked (because of a cartridge that is not inserted fully into its |
|
|
| storage slot for example), an * will be displayed. (This display is automatically |
|
|
| updated if the sensor status changes.) |
|
|
|
|
|
|
VERTICAL | Moves the cartridge transport mechanism down, moves it back up a short |
|
|
ENCODER | distance, then moves it back down. The last time the transport mechanism is |
|
|
| moved down the number of encoder counts is verified. Returns PASS/FAIL. No |
|
|
| tape cartridges are required. |
|
|
|
|
|
|