Installing the Tape Library

 

Step 4: Mount the Library in a Rack (optional)

 

Attach the Rack Slides to the Rack

 

1. Line up the template with an existing product in the rack. Attach clip nuts to

 

each front rail in the locations indicated on the template.

Figure 1-6

Clip Nuts (Front Rails)

NOTE

Do not install the library in the bottom of the rack. Make sure the bottom of the

 

library is no higher than 4 feet off the floor.

 

 

1-12

Page 26
Image 26
HP SureStore 7115w manual Attach the Rack Slides to the Rack, Each front rail in the locations indicated on the template