WARNING

CAUTION

Installing the Tape Library

Moving or Shipping the Library

6.If the library is rack mounted:

a. Extend the anti-tip rail on the rack.

Failure to extend the anti-tip rail could result in personal injury and/or damage to the library if the rack tips over.

b.Slide the library out of the rack so that it is in the fully extended position.

c.Reattach the handles to the side of library using two screws. Make sure the handle flanges are on top of the slides. (The handles and hardware for reattaching them should have been saved with the original shipping materials. If they are missing, call your service representative to order replacement handles.)

d.Remove the three 8-32 screws on each side of the library that secure the library to the rack slides.

e.IMPORTANT — two people needed: With a person on each side of the library, lift the library onto a cart.

7.Transport the library:

• To move the library a short distance, roll the cart to the new location.

• To ship the library, repackage the library in the same materials and ship it in the same manner in which it was received.

The library can be seriously damaged if it is not shipped using appropriate shipping materials. A service representative can provide assistance or advice on how to best repackage and ship the library.

8. Re-install the library. Refer to installation steps in this chapter.

Installation

1-29