Cisco Systems manual Installing the Cisco 1700 Router

Chapter 2 Installing the Cisco 1700 Router

Step 2 Hang the router on the screws with either the left side or right side mounting brackets so that:

•The LEDs are visible to the user—The LEDs indicate the router operating status, so the LEDs should be easily visible.

•The power supply does not hang from its cable—If the power supply is not supported, it might disconnect from the cable that connects it to the router.

Caution If you install the screws in drywall, use hollow wall anchors (1/8 inch

by 5/16 inch) to secure the screws. If the screws are not properly anchored, the strain of the cables connected to the router rear-panel connectors could pull the router from the wall.

	Cisco 1700 Router Hardware Installation Guide
78-5405-03		2-15