Cisco Systems 1700 manual Opening the Chassis

Appendix C Installing and Upgrading Router Memory

Opening the Chassis

In order to upgrade Cisco 1700 router memory, you must open the chassis.

Opening the chassis requires a number one Phillips screwdriver.

Follow these steps to open the chassis:

Step 1 Make sure the router is turned OFF and is disconnected from the power supply.

Step 2 Turn the router upside down, and rest the top of the router on a flat surface.

Step 3 Use the Phillips screwdriver to remove the four screws that hold the top and bottom of the chassis together, as shown in Figure C-1.

Step 4 Turn the router back to its original position (right-side up).

	Cisco 1700 Router Hardware Installation Guide
C-2	78-5405-03