Cisco Systems 7507 quick start Mount Brackets to the Rack Posts, Install the Hardware

Install the Hardware

Mount Brackets to the Rack Posts

Rack post

Flange

53382

Note The distance between the inner edges of the	Step 4 Secure the top of the bracket to the rack
left and right rack-mounting posts must be at least	with two pan-head screws. Finger-tighten
17.72 inches (45.088 cm), and the distance between	the screws.
the holes in the mounting posts must be 18.31 inches	Step 5 Push the brackets as far apart as possible
(46.5 cm) (+ .063 inches or .16 cm).
	before using a Number 2 Phillips
Step 1 Place the bracket on the inner side of the	screwdriver to tighten the screws.
rack post, with the flanged front edge of	Step 6 Adjust the brackets if the distance
the bracket in front of the rack post.
	between them is less than 17.5 inches
Step 2 Align the mounting holes in the bracket	(45.45 cm).
with those in the rack post.	Step 7 Repeat Step 3 through Step 6 for the
Step 3 Support the bracket with one hand, and	remaining bracket. Use a level or tape
use the other hand to insert a 10-32 x	measure to ensure that the two brackets
5/8-inch LG Phillips pan-head screw	are level in the rack.
through the bottom mounting hole on the
front of the bracket and into the rack post.

5