Operating Your Phone
Place a MeetMe Conference Call
Place a MeetMe Conference Call
Procedure
Step 1 Obtain a MeetMe conference number from your system administrator
Step 2 Distribute the MeetMe conference number to all the participants.
Step 3 Go
Step 4 Press the MeetMe soft key.
Step 5 Dial the MeetMe conference number.
All other participants can join the meeting by dialing into the MeetMe conference number.
Step 6 To end the MeetMe conference call, all participants must hang up the handset or press the Cancel soft key.
Privacy
Privacy allows you to prevent others who share your line from seeing information about your calls.
Privacy applies to all shared lines on your phone. If you have multiple shared lines and Privacy is enabled, others cannot view any of your shared lines.
Preferences
1Ringtone
2 Brightness
3 Bluetooth
4 Camera Settings
Redial a Number
To redial the most recently dialed number:
•Lift the handset and press the Redialsoft key.
•Press the Redial soft key to make a call using a speakerphone or headset.
•To place the call on a particular phone line, get a dial tone on that line, then press the Redial softkey.
Ring Setting
You can change the ring setting per line.
Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications Manager Express Version 9.0 (SIP)
33 |
